iGlide solo sliding glass door kit, supplied with all components required to fit 1 glass sliding door on a prepared opening up to 900mm wide by 2400mm high. Pre-finished in satin anodised aluminium. Sleek and minimalist, it is suitable for sliding doors in both a commercial and domestic setting. Integral to the kit is a 2 metre length of easy fit, stylish aluminium tracking. iGlide solo sliding glass door track can be screwed directly to masonry walls or stud partitioning, just unclip the cover and, using the holes provided, either screw directly to the studs or plug and screw to masonry to enable any number of design options to be achieved. If you require iGlide double doors, then just buy two kits and join the track in the centre of the opening.

To calculate the glass size measure from the bottom of the track to the finished floor and deduct 15mm from the height. This will give you 10mm under the door and 5mm between the track and the glass. If you require more to accommodate an uneven floor, then you have the reassurance of an additional 5mm. The hangers can also be adjusted up or down for any necessary adjustment.

The section shows the position against the wall. The distance from the back of the glass to the wall is 14mm , more than sufficient room to allow the cup handles to pass over the wall if required. When screwing to the wall, please ensure there is enough support as glass doors are heavy. The system has been tested to carry 100kg of glass and is certified to 100,000 operations (UK certificated).